← Anwendungen

Ebene 0 des Anwendungsstapels

CapacityIndex

Umfang, Kapazität und Wirtschaftlichkeit

Das Cockpit für die Investitionsreife und der versionierte Umfang des Projekts. Kapazität, Wirtschaftlichkeit, Standort, Genehmigungen und Risiken werden zur Spezifikation, auf der jede weitere Ebene aufbaut, und jede Änderung daran wird zu einer neuen Version.

Konzept: Der KI-Agent schreibt die Spezifikation
simon-lab · capacityindex agent · awaiting approval

Bring 5% lye to 30% with NaOH flakes from 25 kg bags, 14.5 m³ batch, max 60 °C in the tank, 40 °C at discharge. Design it with a bottom-up approach, layer by layer, and fit it into a spare area of my plant.

reading NaOH–H₂O thermodynamics…

balancing mass and heat of dissolution…

sizing agitation and cooling duty…

scanning the site for a spare plot…

drafting the design basis…

SPEC · NaOH dissolving unit · draft 1

DESIGN BASIS

product 30 % w/w NaOH · 14.5 m³ per batch

feed 5 % lye + NaOH flakes · 220 × 25 kg bags = 5.5 t per batch

handling bag-dump station · 2 bags/min · 25 kg within manual-handling limits

limits ≤ 60 °C in the tank · 40 °C at discharge

utilities chilled water 7.5 °C · half-pipe cooling jacket

vessel existing stainless tank · retrofit

PHYSICS FIRST

dissolution is exothermic → dosing rate bounded by cooling duty

density and viscosity 5 → 30 % from NaOH–H₂O property models

solids suspension and power number → agitator selection

CAPACITY & ECONOMICS

demand ≥ 60 m³ of lye per week · 3 shifts × 8 h · 7 days

lye fill and pump-out 10 m³/h each → one batch fits one shift

retrofit of the existing tank instead of a new vessel

LAYERS · bottom-up

4 Architecture spare area on site · roads · site plan

3 PlantMesh 3D assembly · isometrics · supports · clashes

2 MechGraph vessel · agitator · shaft · CFD

IonGrid control cabinets · I/O · heat gains

1 ProcessView P&ID · selections · dynamic simulation

0 CapacityIndex scope · capacity · economics ● this spec

OPEN POINTS

flake purity and size distribution: confirm with the supplier

dust extraction and empty-bag handling at the station

Illustration

Was sie leistet

Jedes Anlagenprojekt beginnt mit Fragen, die noch kein Engineering sind: wie viel, wo, zu welchen Kosten, mit welchen Genehmigungen. CapacityIndex macht daraus eine strukturierte Spezifikation, die Kapazität, Umfang, Wirtschaftlichkeit, Standort, Genehmigungen und Risiken abdeckt, samt Businessplan-Export.

In der Bottom-up-Methode ist das die Ebene null, und sie ist am ersten Tag nie fertig. Was der Kunde erwartet, ist nicht immer möglich und nicht immer die richtige Annahme. In dieser Phase reißt das Gespräch mit dem Kunden nie ab: Änderungen an CAPEX und OPEX werden zusammen mit den technischen Entscheidungen getroffen, die sie betreffen.

Die Entwicklung des Umfangs gehört zu den frustrierendsten Seiten der Ingenieurarbeit, besonders in einer so eng abgestimmten Branche wie der Verfahrenstechnik. Sie ist zugleich unvermeidlich: Ein großer Teil der Arbeit zeigt sich erst unterwegs. Deshalb führt CapacityIndex den Umfang als versionierte Spezifikation. Sie beginnt breit und sammelt mit jeder Iteration die Details, die die geschäftliche und technische Kultur des Anlagenbetriebs beschreiben. Jede Version bleibt nachvollziehbar, und jede Änderung wandert nach oben durch das Projekt, statt am Ende geflickt zu werden.

Aufgaben im Projekt

Demnächst